Rated 4.7/5 on Google based on 200+ reviews
Door and Hardware Federation Assured
4000 series 2 button audio speaker module is for the VX2200 digital audio system with integrated proximity reader finished gun metal grey finish.
The robust modular design is compatible with all flush and surface back boxes in the 4000 series and 955 range of proximity fobs and cards.
View more
The 4000 series audio modules are DDA complaint, equipped with call progress status LEDs: busy, call in progress, communication open and door open. Call reassurance tones to let the visitor know the call is in progress.
All modules contain a speaker and fly lead with microphone which easily fits into a 4000 series frame. Modules attach to the housing frames using a simple but strong clip in system. Speech levels can be adjusted using separate adjustments for both the speaker and microphone.
The modules also have call reassurance tones and 4 call progress LED’s to advise the user when the system is busy, a call is in progress, when to speak and when the door is open.
• Built-in proximity access for up to 60 keyfobs (users).
• Impact Protection rating IK07 and ingress protection rating IP65.
• Microphone and speaker volume control POTs.
• Door open relay operating mode: dry relay contacts CO, NO and NC or capacitor discharge.
Audio/Video: Audio only module however can be used on video systems
Max. multiple combinations (up to 42 max.) using additional 4000 series IDC buttons connecting with CFL17 and CFL45 IDC ribbon cables
Name plate & illumination 1, proximity window 1, back-lit blue
Built-in proximity reader Yes: up to 60 users (max.), user capacity increased up to 1000 (max.) when programmed with 2X00PC software, operating RFID frequency 125kHz (built in proximity reader behind nameplate window for button 1)
Compatible fobs & cards Fobs: 955/T (blue), 955/B (black), 955/R (red), 955/Y (yellow), 955/G (green), card: 955/C
Module protection rating IK07 impact protection and IP65 ingress protection
Call Progress LEDs Yes: 4xLEDs - Busy, Call, Speak and Door open
Module programming and adjustments Dip-switches: Master/slave setup; Push button group configuration; Conversation time; Door open time; Unit ID (ID’s 1 - 8); standard/advanced
programming modes. Jumper J1: relay operating mode - dry contacts or capacitor discharge, Jumper J4: call reassurance tone high/low.
RS485 bus Yes: RS485 bus used for programming with 2X00PC software (via 481 RS485/USB converter) when module set to advanced programming mode
Wiegand input Yes: D0 (data 0), D1 (data 1), LR (red denied LED) and LG (green accept LED)
Module Size 1 module 4000 series: 103 (W) x 120 (L) x 32 (D) mm
Adjustment POTs Yes: microphone and speaker volume controls with balance adjustment
Relay contacts 1 relay: CO, NO and NC / capacitor discharge (switched +pos through NO)
Relay voltage and amp rating Dry contact voltage: 24Vac/dc, 2A max. Capacitor discharge: 12Vac/dc, 1A max.
PTE input Yes: 1xPTE switched 0V input (push-to-make)
Working voltage 12Vdc (compatible PSU’s: 521B and 2291 series cabinets)
Power consumptionstandby: 100mA / max. during operation: 200mA
Working temperature -20°/+60°
