IMPORTANT: DUE TO NEW INCREASED SECURITY SETTINGS, IF PAYING BY CREDIT CARD OR DEBIT CARD YOUR BILLING DETAILS MUST MATCH THE NAME ON YOUR CARD AND THE ADDRESS THE CARD IS REGISTERED TO EXACTLY, IF NOT, THE PAYMENT IS LIKELY TO BE DECLINED
<p><strong>Rated 4.7/5</strong> on Google based on 200+ reviews </p>

Rated 4.7/5 on Google based on 200+ reviews

<p>Door and Hardware Federation <strong>Assured</strong></p>

Door and Hardware Federation Assured

<p><strong>Trusted Trade Supplier</strong> for over 21 years</p>

Trusted Trade Supplier for over 21 years

  • Home
  • CR 40 Adjustable Wrap around Hinge to be Welded M30 thread for 50mm (FLANGE NUT)
Compare selected products
1550676484 750 X 420 Cr 30 35 40 1 3

CR 40 Adjustable Wrap around Hinge to be Welded M30 thread for 50mm (FLANGE NUT)

Product Code: CR40

Rolling Center CR40 adjustable wrap around hinge to be welded with flange nut

Suits a 50mm box section, pair with T40 upright gate joint element

View more
inc VAT

Related Products (2)

CR 35 Adjustable Wrap around Hinge to be Welded M24 thread for 40mm (FLANGE NUT)

CR 35 Adjustable Wrap around Hinge to be Welded M24 thread for 40mm (FLANGE NUT)

Product Code: CR35
inc VAT
View More

SPECIFICATION

MANUALS

Sorry, there are no manuals available for this product.

OPTIONAL ACCESSORIES

T40 Upright gate joint pin for 50mm box section wrap around hinge to weld (C40/CR40/CR40P) 38.5 Dia
T40 Upright gate joint pin for 50mm box section wrap around...
inc. VAT
T40/90 Extended 90mm Upright pin 50mm box section wrap around hinge to weld (C40/CR40/CR40P) 38.5 Dia
T40/90 Extended 90mm Upright pin 50mm box section wrap around...
inc. VAT
F105 BP GALVANISED BOLT DOWN Gate Stop for 2 Leaf Gates 122 X 100 X 36MM
F105 BP GALVANISED BOLT DOWN Gate Stop for 2 Leaf Gates 122 X...
inc. VAT
Promo Link
Promo Link
About Us
About Us
DHF - Raising Standards Safety Assured
Information
Information
My Account
My Account
  • Rolling Center Ltd,
  • Unit 6,
  • Whitehall Cross,
  • Leeds,
  • LS12 5XE
  • © 2025 Rolling Center Ltd.
  • All Rights Reserved
Contacts
DHF - Raising Standards Safety Assured
Follow Us
Get free News & Tech advice straight to your inbox...
WARNING!

The installation of powered gate automation is regulated by the Supply of Machinery (Safety) Regulations which recognises a powered gate as machinery. The law requires that the resulting machine complies with the Essential Health and Safety Requirements of the regulations. Guidance for the required level of safety can be found in the EN 12453

If you are not fully aware of the requirements of the Supply of Machinery (Safety) Regulations, the implications of the Health and Safety at Work Act or the contents of EN 12453 you are advised to seek specialist training or the assistance of a properly qualified and equipped powered gate specialist before undertaking to proceed with the installation, repair or maintenance.

  • Rolling Center Ltd,
  • Unit 6,
  • Whitehall Cross,
  • Leeds,
  • LS12 5XE
  • © 2025 Rolling Center Ltd.
  • All Rights Reserved