Pay in 3 interest-free payments.
Shop Now, Pay with Klarna
A tracked sliding gate runs on wheels along a ground track laid across and beside the opening. The parts work as a system, so it pays to choose them together:
The range also includes U channels, pins, pulleys and sliding gate accessories, and for gates that need to travel around a bend, corner radius hardware.
Most sliding gate problems start where the wheel meets the track. Our wheels come in V, O and U groove profiles, in 100mm and 120mm diameters and 20mm and 30mm widths, with one or two bearings and open or closed supports. Each profile is made for a particular track, so choose the track first, then the wheel to suit it, and size the wheels for the weight of the gate. For a heavy or frequently used gate, twin-bearing wheels and closed supports are worth considering.
Before you order, work through these points:
Our guide to planning a sliding gate covers layout and foundations in more detail.
Wheels, guide rollers, travel stops and fixings are the parts most likely to wear over the life of a sliding gate. Replacing a worn wheel or roller early helps protect the track and gate frame from further damage. When ordering a replacement, match the original specification, particularly the wheel groove and size. If the original part number is not available, send us a description or photo and our team can usually identify the right part.
Most sliding gates can be automated with a sliding gate motor driving gear rack fixed to the gate, or you can start from a complete sliding gate kit. Match the motor to the weight of the gate and how often it will be used, and plan the safety devices a powered gate needs, such as photocells and safety edges. See our full sliding gate automation range for motors, control units and accessories.
Rolling Center has over 30 years of experience supplying gate hardware and is the leading gate hardware supplier in Yorkshire and the North of England. As the exclusive UK importer for Rolling Center SpA, we supply its sliding and cantilever hardware direct, alongside the rest of our gate hardware range. Customers rate us 4.8/5 on Google, and our team can help you match parts, size a gate and plan automation. Trade customers can apply for a trade account, or contact us with your project details.
A typical tracked sliding gate needs a ground track, wheels to run on it, guide rollers at the top to keep it upright, travel stops at each end, and a gate keep or lock on the closing post. Automated gates also need gear rack for the motor. Pins, pulleys, U channels and meeting points are added depending on the design.
The wheel’s groove must match the track’s profile and size, otherwise the gate will run roughly and wear quickly. Each wheel’s product description gives its groove type and the track it suits, and some are made for a specific track size, such as 16mm. If you are replacing a wheel and are unsure of the track, send us a photo and we can identify it.
A tracked sliding gate runs on wheels along a track across the opening. A cantilever gate has no track in the gateway: it is carried on carriages beside the opening and needs a counterbalance section behind the gate. Tracked gates need less space alongside; cantilever gates suit sites where a ground track would be hard to keep clear.
Usually, yes. A sliding gate motor drives the gate through gear rack fixed along it, so the gate, track and wheels need to be in good condition and suited to powered use. If you are building a manual gate now and may automate it later, let us know so the hardware and layout allow for it.
Yes. Our stainless steel sliding gate hardware range is the better choice for coastal and exposed sites, where standard galvanised parts can corrode faster. Upgrading wear parts such as wheels and fixings is often worthwhile even if the rest of the gate is galvanised.
Start with any part number on the old component. If there is none, measure it and send us a photo, along with a photo of the track for wheels, and our team can usually identify a match. Replacing a worn wheel or guide roller early also helps protect the track and gate frame.
Save 5% on gate hardware, automation and more all November. No minimum spend.
BLACKFRIDAY5Enter at checkout. Excludes delivery. Cannot be used with any other promotional code.