Rated 4.7/5 on Google based on 200+ reviews
Door and Hardware Federation Assured
The 2213 remote relay module is designed to work on the VX2200 system. For higher security applications, including installations in compliance with Secured by Design, the 2213 enables the relay and push-to-exit button input to be installed in a secure location away from the entrance.
View moreThe 2213 remote relay can be used for the following applications: ensuring that if the door entry intercom panel is vandalised or the cables cut, the electric lock or magnet remains operational, ensuring that the door remains secure. In addition to securing the main entrance door, the relay can also be used at additional doors such as rear entrances, bin stores, etc. to allow a concierge to release the electric lock from a central position.
Designed to work in conjunction with the VX2200 intercom series, the 2213 remote relay is an essential component in order to comply with the STS202 BR2 level of burglary resistance.
The 2213 remote relay connects directly to the VX2200 2-wire bus and is powered from a 12V DC supply. Once programmed with an ID to match the entrance panel, it will allow the on-board relay to be activated by users in apartments via their telephone or videophone, a concierge, or an access code entered on the entrance panel. The dry contact changeover relay output activation time is programmable from 1 to 30 seconds. A push-to-exit button input is also included on board. When mounted in a secure area of the building, this increases the security of the system, illuminating the possibility of circumventing the lock from within the door panel.
Programming is carried out using dip switches where it is possible to program the relay time and device ID.
TECHNICAL SPECIFICATION
Input voltage: 12V - 14Vdc power input (+/-10%)
Current (standby): 6.4mA (max.)
Curent (during operation): 41mA (max.)
PTE input open voltage: 5Vdc
PTE input closed voltage: 0V
Databus voltage: 7.5V - 8Vdc (L/-)
Maximum cable resistance: 7Ω
Relay contacts: CO, NO and NC (10A @ 24Vdc, 12A @ 120Vac, 5A @ 250Vac)
Programming: Programming via 8 way dip-switches: device ID setup ID.1 - ID.16, relay activation time setup (1, 2, 4, 6, 8, 10, 12 or 15 seconds), operating mode local mode (default) or main mode (to operate with 2206N bus exchange devices).
Enclosure material: ABS plastic (white)
Enclosure dimensions (mm): 66 (W) x 60 (H) x 22 (D)
Mounting: Surface, direct wall fixing
