IMPORTANT: DUE TO NEW INCREASED SECURITY SETTINGS, IF PAYING BY CREDIT CARD OR DEBIT CARD YOUR BILLING DETAILS MUST MATCH THE NAME ON YOUR CARD AND THE ADDRESS THE CARD IS REGISTERED TO EXACTLY, IF NOT, THE PAYMENT IS LIKELY TO BE DECLINED
<p><strong>Rated 4.8/5</strong> on Google based on 130+ reviews </p>

Rated 4.8/5 on Google based on 130+ reviews

<p>Door and Hardware Federation <strong>Assured</strong></p>

Door and Hardware Federation Assured

<p><strong>Trusted Trade Supplier</strong> for over 21 years</p>

Trusted Trade Supplier for over 21 years

Compare selected products
Go16 wheel

Rolling Center 518GO16 50mm Diameter swivel support wheel for 16mm O groove track

Product Code: 518GO16

50mm diameter O Groove wheel with swivel support for corner radius 16mm track

1 bearing weight capacity of 80kg per wheel 

View more
inc VAT

Related Products (1)

Rolling Center 820G016 80mm Diameter swivel support wheel for 16mm O groove track

Rolling Center 820G016 80mm Diameter swivel support wheel for 16mm O groove track

Product Code: 820G016
inc VAT

SPECIFICATION

Go16 dims

MANUALS

Sorry, there are no manuals available for this product.

This kit contains:

OPTIONAL ACCESSORIES

Rolling Center FL16/95 16mm O Groove Corner radius 950mm track for sliding gates
Rolling Center FL16/95 16mm O Groove Corner radius 950mm track...
inc. VAT
Rolling Center FL16/50 16mm O Groove Corner radius 500mm track for sliding gates
Rolling Center FL16/50 16mm O Groove Corner radius 500mm track...
inc. VAT
Rolling Center CRS1 Raised hinge for sliding sectional doors
Rolling Center CRS1 Raised hinge for sliding sectional doors
inc. VAT
Floor Z3/16 16mm 0 groove galvanised bolt down track 3m
Floor Z3/16 16mm 0 groove galvanised bolt down track 3m
inc. VAT
Promo Link
Promo Link
About Us
About Us
DHF - Raising Standards Safety Assured
Information
Information
My Account
My Account
  • Rolling Center Ltd,
  • Unit 6,
  • Whitehall Cross,
  • Leeds,
  • LS12 5XE
  • © 2024 Rolling Center Ltd.
  • All Rights Reserved
Contacts
DHF - Raising Standards Safety Assured
Follow Us
Get free News & Tech advice straight to your inbox...
WARNING!

The installation of powered gate automation is regulated by the Supply of Machinery (Safety) Regulations which recognises a powered gate as machinery. The law requires that the resulting machine complies with the Essential Health and Safety Requirements of the regulations. Guidance for the required level of safety can be found in the EN 12453

If you are not fully aware of the requirements of the Supply of Machinery (Safety) Regulations, the implications of the Health and Safety at Work Act or the contents of EN 12453 you are advised to seek specialist training or the assistance of a properly qualified and equipped powered gate specialist before undertaking to proceed with the installation, repair or maintenance.

  • Rolling Center Ltd,
  • Unit 6,
  • Whitehall Cross,
  • Leeds,
  • LS12 5XE
  • © 2024 Rolling Center Ltd.
  • All Rights Reserved