Rated 4.8/5 on Google based on 130+ reviews
Door and Hardware Federation Assured
A quiet and reliable sliding gate kit that is easy to install. The Robus 600 is suitable for light residential gates.
It is adaptable to climatic conditions and has adjustable acceleration and deceleration at opening and closing.
Supplied with 4 x Art 47 - Mod 4 gear rack for industrial sliding gate applications, to bolt, supplied in 1 metre lengths, galvanised steel.
User-friendly: the Nice BlueBUS technology, enables to power and control a maximum of seven pairs of photocells from the MoonBus series using two wires only.
Practical: the control unit and PS124 buffer battery (optional) can be connected by means of a simple connector and can be housed directly inside Robus.
Advanced: RB600 is equipped with a temperature sensor: adapt the motor power to the climatic conditions and at the same time thermal cut-out. A master/slave selection automatically synchronizes two motors. This means it is possible to automate 2-leaf sliding gates set opposite each other.
Intelligent: thanks to the obstacle detection system and automatic programming of the working times. Self-diagnosis by means of a flashing light. 8 programming levels.
Safe: acceleration and deceleration can be adjusted at the beginning and end of each opening and closing manoeuvre.
Sturdy: base and release in pressure die cast aluminium and epoxy paint finish.
Very quiet: gear motor on bearings.
NICE Robus 600 Sliding gate motor
NICE Bluebus photocell pair
NICE Plug in Receiver
NICE 2 Button transmitters
Rolling Center 1m Steel 30mm x 12mm gear rack with weld staves
