New improvements to the 2025 design include the below:
Built-in LED Status Indicator: Stay in control with the easy-to-read LED status indicator on the front cover. It’s simple to monitor any faults with the colour of the LED or how many times it flashes. Diagnosis without having to open up the motor.
Built-in Receiver: Say goodbye to plug in OXIBD and separate receivers. The Robus 600 now comes with an integrated receiver on the MCU1 control panel, making installation faster and tidier. Less clutter, more convenience!
User-friendly: the Nice BlueBUS technology, enables power and to control a maximum of seven pairs of photocells from the MoonBus (Bluebus) series using two wires only.
Practical: the control unit and PS124 buffer battery (optional) can be connected by means of a simple connector and can be housed directly inside Robus.
Advanced: RB600 is equipped with a temperature sensor: adapt the motor power to the climatic conditions and at the same time thermal cut-out. A master/slave selection automatically synchronises two motors. This means it is possible to automate 2-leaf sliding gates set opposite each other.
Intelligent: thanks to the obstacle detection system and automatic programming of the working times. Self-diagnosis by means of a flashing light. 8 programming levels.
Safe: acceleration and deceleration can be adjusted at the beginning and end of each opening and closing manoeuvre.
Sturdy: base and release in pressure die cast aluminium and epoxy paint finish.
Very quiet: gear motor on bearings.
Pay in 3 interest-free payments.
Shop Now, Pay with Klarna
