IMPORTANT: DUE TO NEW INCREASED SECURITY SETTINGS, IF PAYING BY CREDIT CARD OR DEBIT CARD YOUR BILLING DETAILS MUST MATCH THE NAME ON YOUR CARD AND THE ADDRESS THE CARD IS REGISTERED TO EXACTLY, IF NOT, THE PAYMENT IS LIKELY TO BE DECLINED

Pay in 3 interest-free payments.

Shop Now, Pay with Klarna

Pay in 3 interest-free payments.

Shop Now, Pay with Klarna

“GCA-28-400N-KIT Adjustable Speed 400N 100kg Gas Gate Closer Kit” has been added to your basket. View basket

GCA-28-500N-KIT Adjustable Speed 500N 125kg Gas Gate Closer Kit

Product ID: GCA-28-500N-KIT

Gas Closer Adjustable speed kit, for gates up to 2m width and 125kg weight capacity.

The kit includes adjustable speed gas closer, mounting brackets for weld or screw fixings and force adjustment tool.

Learn more about Iwoca here…

£160.00

ex. VAT

£192.00 inc. VAT

Become a Trade Customer

To receive our best prices on thousands of automation, access control and safety products.

Additional Information

The Adjustable gate closer is fixed to the opening side fo the pedestrian gate and is compressed. Be advised to fit a gate stop to limit the gates opening angle at 90 degrees. The gate closer can be damaged by force such as wind or physical movement when fully compressed open.

The closing force can be reduced by using one of the post bracket mounting holes nearer to the gate post, from a choice of 3. Either weld or screw the bracket on to the gate post.

If the closing force is still too high it can be reduced by releasing some nitrogen gas from the cylinder. Please speak to our technical team prior to this, the AT-10 adjustment tool is required.

Specification

Installation Video https://youtu.be/060REoFYrWw

Installation Instructions:

1. Fix the long bracket to the gate post with the dimensions detailed in the Recommended Installation.
2. Fix the small bracket to the gate. Ensure there is a distance of 740mm from the center of the furthest post bracket hole to the center of the gate bracket hole and the brackets are horizontally aligned.
3. Compress the gate closer and connect to the brackets. The speed adjustment end connects to the small gate bracket.
4. Rotate the adjustment collar anti-clockwise until the desired speed is achieved.

Do not compress the mounting brackets by overtightening the nyloc nuts.
Only tighten the nuts until level with end of bolt, the bolt must not protrude from the nut.

This allows the gate closer to tilt slightly and prevents stress on the connecting parts.