IMPORTANT: DUE TO NEW INCREASED SECURITY SETTINGS, IF PAYING BY CREDIT CARD OR DEBIT CARD YOUR BILLING DETAILS MUST MATCH THE NAME ON YOUR CARD AND THE ADDRESS THE CARD IS REGISTERED TO EXACTLY, IF NOT, THE PAYMENT IS LIKELY TO BE DECLINED

Pay in 3 interest-free payments.

Shop Now, Pay with Klarna

Pay in 3 interest-free payments.

Shop Now, Pay with Klarna

BFT STOPPY B 500mm electro-mechanical automatic rising bollard

Product ID: STOPPYB500

Designed for domestic driveway installations to control access and provide security to property and buildings, the BFT Stoppy B 500 is a simple, ready to install and value for money automatic rising bollard.

Electro-mechanical automatic rising bollard
Additional automatic rising bollard for use with BFT STOPPY B Kit 500mm x 115mm electromechanical automatic bollard
230 V
Diameter: 115 mm
Raised Height 500 mm
Rear-reflecting strip
Impact resistance 6000 J
To be used with Perseo cbd dedicated control panel (not included)

Options for controlling the bollard are:

The Mitto transmitter which can be programmed straight in using the built in receiver (sold separately)
Loop detectors for vehicles (sold separately)

Single bollard unit only

Learn more about Iwoca here…

£1,657.50

ex. VAT

£1,989.00 inc. VAT

Become a Trade Customer

To receive our best prices on thousands of automation, access control and safety products.

Additional Information

Overview:

Guarantee: 2 years
Opening/closing time: 7 seconds
Usage: semi-intensive

Installation:

Requires a 230v power supply to each panel
Foundation depth Min 1200mm (including 125mm for drainage) x 800mm x 800mm to be concreted below ground with adequate drainage
High water areas may experience slow water drain-off
Not recommended for sites prone to regular flooding
PERSEO CBD Control panel: Maximum of 4 bollards in parallel on the same system
Distance between bollards should be 1-1.5 metres

Specification

Control unit	PERSEO CBE
Power supply	230 V
Power consumption	300 W
Opening or closing time	7 s
Rod height	500 mm
Rod diameter	115 mm
Type of limit switch	REED magnetic sensor
Slowdown	Yes

Impact resistance	6000 J
Break-in proof	60000 J
Manual cycle	reversible in the absence of voltage
Frequency of use	Semi intensive
Protection rating	IP67
Environmental conditions	-20 ÷ 60 °C
U-Link	no

Imperial measurements

The data shown are for information purposes only.

Control unit	PERSEO CBE
Power supply	230 V
Power consumption	300 W
Opening or closing time	7 s
Rod height	19.68505 inch
Rod diameter	4.5275615 inch
Type of limit switch	REED magnetic sensor
Slowdown	Yes

Impact resistance	6000 J
Break-in proof	60000 J
Manual cycle	reversible in the absence of voltage
Frequency of use	Semi intensive
Protection rating	IP67
Environmental conditions	-4 ÷ 140 °F
U-Link	no