IMPORTANT: DUE TO NEW INCREASED SECURITY SETTINGS, IF PAYING BY CREDIT CARD OR DEBIT CARD YOUR BILLING DETAILS MUST MATCH THE NAME ON YOUR CARD AND THE ADDRESS THE CARD IS REGISTERED TO EXACTLY, IF NOT, THE PAYMENT IS LIKELY TO BE DECLINED
Stoppy B 200 700
Allu 230V Netzteil

BFT STOPPY B 700mm electro-mechanical automatic rising bollard

Product Code: STOPPYB700

An effective solution for controlling access and providing security to protect domestic properties and vehicles, the BFT Stoppy B 700 is a simple, ready to install and value for money automatic rising bollard.

Options for controlling the bollard is:

  • The Mitto transmitter which can be programmed straight in using the built in receiver (sold separately)
  • Loop detectors for vehicles (sold separately)

Single bollard unit only

View more
inc VAT

Related Products (1)

ADDITIONAL INFORMATION

Overview:

  • Guarantee: 2 years
  • Opening/closing time: 9 seconds
  • Usage: semi-intensive

Installation:

  • Requires a 230v power supply to each panel
  • Foundation depth Min 1430 mm (including 250mm for drainage) to be concreted below ground with adequate drainage
  • Foundation box: 1180mm x 273mm x 5mm
  • High water areas may experience slow water drain-off
  • Not recommended for sites prone to regular flooding
  • PERSEO CBD Control panel: Maximum of 4 bollards in parallel on the same system
  • Distance between bollards should be 1-1.5 metres

SPECIFICATION

technical design STOPPY B
Control unitPERSEO CBE
Power supply230 V
Power consumption300 W
Opening or closing time9 s
Rod height700 mm
Rod diameter200 mm
Type of limit switchREED magnetic sensor
SlowdownYes
Impact resistance6000 J
Break-in proof60000 J
Manual cyclereversible in the absence of voltage
Frequency of useSemi intensive
Protection ratingIP67
Environmental conditions-20 ÷ 60 °C
U-Linkno

Imperial measurements

The data shown are for information purposes only.

Control unitPERSEO CBE
Power supply230 V
Power consumption300 W
Opening or closing time9 s
Rod height27.55907 inch
Rod diameter7.87402 inch
Type of limit switchREED magnetic sensor
SlowdownYes
Impact resistance6000 J
Break-in proof60000 J
Manual cyclereversible in the absence of voltage
Frequency of useSemi intensive
Protection ratingIP67
Environmental conditions-4 ÷ 140 °F
U-Linkno

This kit contains:

OPTIONAL ACCESSORIES

Nice M5Bar Kit Bar Length up to 4m 24v
Nice M5Bar Kit Bar Length up to 4m 24v
inc. VAT
Nice M7Bar Kit Bar Length up to 6m 24v
Nice M7Bar Kit Bar Length up to 6m 24v
inc. VAT
Nice Bar Kit 3 Bar Length up to 8m 24v
Nice Bar Kit 3 Bar Length up to 8m 24v
inc. VAT
Procon LD100 single channel boxed loop detector 230v
Procon LD100 single channel boxed loop detector 230v
inc. VAT
Procon LD102 single channel boxed loop detector 24v
Procon LD102 single channel boxed loop detector 24v
inc. VAT
Procon LD213 dual channel card loop detector 24v
Procon LD213 dual channel card loop detector 24v
inc. VAT
Procon LD200 dual channel boxed loop detector & base 230v
Procon LD200 dual channel boxed loop detector & base 230v
inc. VAT
Procon LD202 dual channel boxed loop detector & base 24v
Procon LD202 dual channel boxed loop detector & base 24v
inc. VAT