Nice Robuskit 3 24v sliding gate kit for gates up to 1000kg 24v

ADDITIONAL INFORMATION

Nice Robuskit 3

User-friendly: the Nice BlueBUS technology, enables to power and control a maximum of seven couples of photocells from the MoonBus series using two wires only.

Practical: the control unit and PS124 buffer battery (optional) can be connected by means of a simple connector and can be housed directly inside the motor.

Advanced: RB400, RB600 and RB1000 are equipped with a temperature sensor: adapt the motor power to the climatic conditions and at the same time thermal cut-out. A master/slave selection automatically synchronises two motors. This means it is possible to automate 2-leaf sliding gates set opposite each other.

Intelligent: thanks to the obstacle detection system and automatic programming of the working times. Self-diagnosis by means of a flashing light. 8 programming levels.

Safe: acceleration and deceleration can be adjusted at the beginning and end of each opening and closing manoeuvre.

Sturdy: base and release in pressure die cast with easy to open handle. Very quiet: gear motor on bearings.

SPECIFICATION

Kit contains:

1 x RB1000; 24vdc 1000kg irreversible electro-mechanical motor with built in control panel, electromechanical limit switch; 2 x ON2E 2 channel 433.92Mhz rolling code transmitters; 1 x Pair of EPMB photocells for connection via BlueBUS system; 1 x OXI receiver.