Nice Robuskit 4 24v sliding gate kit for gates up to 1000kg 24v with inductive limits

ADDITIONAL INFORMATION

User-friendly: the Nice BlueBUS technology, enables to power and control a maximum of 7 couples of photocells from the MoonBus series using two wires only.

Self closing: can be programmed to self close.

Practical: the control unit and PS124 buffer battery (optional) can be connected by means of a simple connector and can be housed directly inside the motor.

Advanced: Robuskit 1 & 3 are equipped with a temperature sensor which adapts the motor power to the climatic conditions and at the same time the thermal cut-out. A master/slave selection automatically synchronises 2 motors. This means it is possible to automate 2-leaf sliding gates set opposite each other.

Intelligent: thanks to the obstacle detection system and automatic programming of the working times. Self-diagnosis by means of a flashing light. 8 programming levels.

Safe: acceleration and deceleration can be adjusted at the beginning and end of each opening and closing manoeuvre.

Sturdy: base and release in pressure die cast with easy to open handle.

Very quiet: gear motor on bearings.

SPECIFICATION

Kit contains:

• 1 x RB1000 24 vdc 1000kg irreversible electro-mechanical motor with inductive limits and built in control panel
• 2 x ON2E 2 Channel Transmitters
• 1 x Pair of EMPB Photocells
• 1 x OXI 4 Channel Receiver