IMPORTANT: DUE TO NEW INCREASED SECURITY SETTINGS, IF PAYING BY CREDIT CARD OR DEBIT CARD YOUR BILLING DETAILS MUST MATCH THE NAME ON YOUR CARD AND THE ADDRESS THE CARD IS REGISTERED TO EXACTLY, IF NOT, THE PAYMENT IS LIKELY TO BE DECLINED
NICE RB600bdkce

Nice Robuskit 1 24v sliding gate kit for gates up to 600kg

Product Code: RB600BDKCE

THIS KIT DOES NOT INCLUDE DRIVE RACK

This is an easy to install sliding gate kit that is suitable for light residential gates up to 600kg in weight.

A quiet and reliable sliding gate kit that is easy to install

It is adaptable to climatic conditions and has adjustable acceleration and deceleration at opening and closing.

NOW SUPPLIED WITH NEW MYGO4 TRANSMITTERS AND ELDC FLASHING LIGHT

View more
inc VAT

Related Products (4)

inc VAT

ADDITIONAL INFORMATION

User-friendly: the Nice BlueBUS technology, enables to power and control a maximum of 7 pairs of photocells from the MoonBus series using two wires only.

Self closing: can be programmed to self close.

Practical: the control unit and PS124 buffer battery (optional) can be connected by means of a simple connector and can be housed directly inside the motor.

Advanced: Robus 600 & 1000 are equipped with a temperature sensor which adapts the motor power to the climatic conditions and at the same time the thermal cut-out. A master/slave selection automatically synchronises 2 motors. This means it is possible to automate 2-leaf sliding gates set opposite each other.

Intelligent: thanks to the obstacle detection system and automatic programming of the working times. Self-diagnosis by means of a flashing light. 8 programming levels.

Safe: acceleration and deceleration can be adjusted at the beginning and end of each opening and closing manoeuvre.

Sturdy: base and release in pressure die cast with easy to open handle.

Very quiet: gear motor on bearings.

SPECIFICATION

Rb600 Table

This kit contains:

  • 1 x RB600

    24 vdc 600kg irreversible electro-mechanical motor with built in control panel

  • 1 x Pair

    EPMB Photocells

  • 1 X OXIBD

    Receiver

  • 2 x MYGO4

    4 Channel Slim Transmitters

  • 1 X ELDC

    24v Flashing Light

OPTIONAL ACCESSORIES

63/4 1m Nylon gear rack with Steel core 30 x 20mm x 1m
63/4 1m Nylon gear rack with Steel core 30 x 20mm x 1m
inc. VAT
47 1M Gear Rack 30mm x 12mm (Inc. 3 weld fixings)
47 1M Gear Rack 30mm x 12mm (Inc. 3 weld fixings)
inc. VAT
47/A2 2M Gear Rack 30mm x 12mm (Inc. 5 weld fixings)
47/A2 2M Gear Rack 30mm x 12mm (Inc. 5 weld fixings)
inc. VAT
Nice EPMB pair of outdoor BlueBUS photocells
Nice EPMB pair of outdoor BlueBUS photocells
inc. VAT
Nice ON2E 2 channel rolling code transmitter
Nice ON2E 2 channel rolling code transmitter
inc. VAT
NICE EDSW G 3 channel wireless keypad
NICE EDSW G 3 channel wireless keypad
inc. VAT
Nice BiDi Plugin Bus Wifi programming interface
Nice BiDi Plugin Bus Wifi programming interface
inc. VAT