Locinox Interio built in hydraulic gate closer

ADDITIONAL INFORMATION

• Optional hinge sets for ground and wall installation available
• Closing speed of the gate can be adjusted by simply adjusting a valve with an Allen key
• Final snap (free run) on the gate closer is available to ensure the latching of the gate or can be eliminated completely in order to have a silent closing (i.e. in combination with magnetic locks)
• When opened 180 degrees, the gate closer will self-close over the 180 degrees.
• Hydraulic dampening mechanism
• Double rubber sealings to avoid oil leakage at all times
• Rotary seals (vs. linear) seals to ensure the longevity of the closer.

INSTALLATION

• A pre-tension shall be integrated in the gate closer ensuring an efficient installation.
• The closer shall have pre-mounted fasteners (no welding) with stainless steel bolts
• All brackets for fixation should come with the product
• The same gate closer shall be able to be used for both left and right turning gates
• Depending of the installation, the gate closer shall require a gate stop to be used for limiting the opening angle
• A 3D-installation explanatory video shall be available for assisting the installer
• Drilling templates shall be included for assisting the installer

MATERIAL

• The mechanism is made out stainless steel and aluminum components
• The housing of the mechanism is made from extruded, powder coated aluminum (no wet painting or anodization). The powder coating is according to the Qualicoat standards
• The gate closer has a corrosion resistance of 500h salt spray according to ISO9227 and fully weatherproof
• UV-resistance against discoloration of 500h

SPECIFICATION